-40mm Recycled Blended Subbase

 

Demolished concrete, brick, roof tiles, ceramic tiles, road base and asphalt are a valuable resource material that can be suitably recycled and blended back into various construction materials. Using recycled Construction & Demolition materials in your next construction project eliminates the need for demolished C & D waste being disposed of at council land fill sites, which assists in protecting the environment from further degradation.

Specification

-40mm recycled blended subbase can be supplied to;

  • RMS 3051 Ed.7 specification

Material Data

Note: All results are indicative only and to standard compaction RMS T111:

  • Maximum Dry Density – 1.8-79t/m3
  • Maximum Wet Density – 2.05t/m3
  • Optimum Moisture Content – 14.9%
  • Particle Size Distribution - Test Method: RMS T106/T107
  • California Bearing Ratio  > 60%
  • Plasticity index – Non Plastic
  • Fractured Faces > 75%
  • Misshapen 2:1 < 35%
  • Maximum Dry Compressive Strength > 1.0MPa                                                 
  • Wet Strength > 70kN
  • Wet/Dry Strength Variation < 35%
  • Acid soluble sulphate content < 0.03%

Benefits

-40mm recycled blended base is an excellent road making material.

  • High quality material that compacts easily
  • High load bearing strength 
  • Impervious to water, low shrink swell properties
  • Construction activities can often continue during wet conditions 
  • Reducing the impact on natural resources
  • Working towards an ecologically sustainable future

Uses & Applications

-40mm recycled blended base has many pavement construction uses.

Some typical uses include:

  • Subbase layer for road pavement
  • Select and structural fill material
  • Base course for hardstand and carpark areas
  • Base course for building pads
  • Subbase layer under concrete driveways and footpaths